📄 Source: PolicyControllerHubConfig.php
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\GKEHub;
class PolicyControllerHubConfig extends \Google\Collection
{
/**
* Spec is unknown.
*/
public const INSTALL_SPEC_INSTALL_SPEC_UNSPECIFIED = 'INSTALL_SPEC_UNSPECIFIED';
/**
* Request to uninstall Policy Controller.
*/
public const INSTALL_SPEC_INSTALL_SPEC_NOT_INSTALLED = 'INSTALL_SPEC_NOT_INSTALLED';
/**
* Request to install and enable Policy Controller.
*/
public const INSTALL_SPEC_INSTALL_SPEC_ENABLED = 'INSTALL_SPEC_ENABLED';
/**
* Request to suspend Policy Controller i.e. its webhooks. If Policy
* Controller is not installed, it will be installed but suspended.
*/
public const INSTALL_SPEC_INSTALL_SPEC_SUSPENDED = 'INSTALL_SPEC_SUSPENDED';
/**
* Request to stop all reconciliation actions by PoCo Hub controller. This is
* a breakglass mechanism to stop PoCo Hub from affecting cluster resources.
*/
public const INSTALL_SPEC_INSTALL_SPEC_DETACHED = 'INSTALL_SPEC_DETACHED';
protected $collection_key = 'exemptableNamespaces';
/**
* Sets the interval for Policy Controller Audit Scans (in seconds). When set
* to 0, this disables audit functionality altogether.
*
* @var string
*/
public $auditIntervalSeconds;
/**
* The maximum number of audit violations to be stored in a constraint. If not
* set, the internal default (currently 20) will be used.
*
* @var string
*/
public $constraintViolationLimit;
protected $deploymentConfigsType = PolicyControllerPolicyControllerDeploymentConfig::class;
protected $deploymentConfigsDataType = 'map';
/**
* The set of namespaces that are excluded from Policy Controller checks.
* Namespaces do not need to currently exist on the cluster.
*
* @var string[]
*/
public $exemptableNamespaces;
/**
* The install_spec represents the intended state specified by the latest
* request that mutated install_spec in the feature spec, not the lifecycle
* state of the feature observed by the Hub feature controller that is
* reported in the feature state.
*
* @var string
*/
public $installSpec;
/**
* Logs all denies and dry run failures.
*
* @var bool
*/
public $logDeniesEnabled;
protected $monitoringType = PolicyControllerMonitoringConfig::class;
protected $monitoringDataType = '';
/**
* Enables the ability to mutate resources using Policy Controller.
*
* @var bool
*/
public $mutationEnabled;
protected $policyContentType = PolicyControllerPolicyContentSpec::class;
protected $policyContentDataType = '';
/**
* Enables the ability to use Constraint Templates that reference to objects
* other than the object currently being evaluated.
*
* @var bool
*/
public $referentialRulesEnabled;
/**
* Sets the interval for Policy Controller Audit Scans (in seconds). When set
* to 0, this disables audit functionality altogether.
*
* @param string $auditIntervalSeconds
*/
public function setAuditIntervalSeconds($auditIntervalSeconds)
{
$this->auditIntervalSeconds = $auditIntervalSeconds;
}
/**
* @return string
*/
public function getAuditIntervalSeconds()
{
return $this->auditIntervalSeconds;
}
/**
* The maximum number of audit violations to be stored in a constraint. If not
* set, the internal default (currently 20) will be used.
*
* @param string $constraintViolationLimit
*/
public function setConstraintViolationLimit($constraintViolationLimit)
{
$this->constraintViolationLimit = $constraintViolationLimit;
}
/**
* @return string
*/
public function getConstraintViolationLimit()
{
return $this->constraintViolationLimit;
}
/**
* Map of deployment configs to deployments (“admission”, “audit”,
* “mutation”).
*
* @param PolicyControllerPolicyControllerDeploymentConfig[] $deploymentConfigs
*/
public function setDeploymentConfigs($deploymentConfigs)
{
$this->deploymentConfigs = $deploymentConfigs;
}
/**
* @return PolicyControllerPolicyControllerDeploymentConfig[]
*/
public function getDeploymentConfigs()
{
return $this->deploymentConfigs;
}
/**
* The set of namespaces that are excluded from Policy Controller checks.
* Namespaces do not need to currently exist on the cluster.
*
* @param string[] $exemptableNamespaces
*/
public function setExemptableNamespaces($exemptableNamespaces)
{
$this->exemptableNamespaces = $exemptableNamespaces;
}
/**
* @return string[]
*/
public function getExemptableNamespaces()
{
return $this->exemptableNamespaces;
}
/**
* The install_spec represents the intended state specified by the latest
* request that mutated install_spec in the feature spec, not the lifecycle
* state of the feature observed by the Hub feature controller that is
* reported in the feature state.
*
* Accepted values: INSTALL_SPEC_UNSPECIFIED, INSTALL_SPEC_NOT_INSTALLED,
* INSTALL_SPEC_ENABLED, INSTALL_SPEC_SUSPENDED, INSTALL_SPEC_DETACHED
*
* @param self::INSTALL_SPEC_* $installSpec
*/
public function setInstallSpec($installSpec)
{
$this->installSpec = $installSpec;
}
/**
* @return self::INSTALL_SPEC_*
*/
public function getInstallSpec()
{
return $this->installSpec;
}
/**
* Logs all denies and dry run failures.
*
* @param bool $logDeniesEnabled
*/
public function setLogDeniesEnabled($logDeniesEnabled)
{
$this->logDeniesEnabled = $logDeniesEnabled;
}
/**
* @return bool
*/
public function getLogDeniesEnabled()
{
return $this->logDeniesEnabled;
}
/**
* Monitoring specifies the configuration of monitoring.
*
* @param PolicyControllerMonitoringConfig $monitoring
*/
public function setMonitoring(PolicyControllerMonitoringConfig $monitoring)
{
$this->monitoring = $monitoring;
}
/**
* @return PolicyControllerMonitoringConfig
*/
public function getMonitoring()
{
return $this->monitoring;
}
/**
* Enables the ability to mutate resources using Policy Controller.
*
* @param bool $mutationEnabled
*/
public function setMutationEnabled($mutationEnabled)
{
$this->mutationEnabled = $mutationEnabled;
}
/**
* @return bool
*/
public function getMutationEnabled()
{
return $this->mutationEnabled;
}
/**
* Specifies the desired policy content on the cluster
*
* @param PolicyControllerPolicyContentSpec $policyContent
*/
public function setPolicyContent(PolicyControllerPolicyContentSpec $policyContent)
{
$this->policyContent = $policyContent;
}
/**
* @return PolicyControllerPolicyContentSpec
*/
public function getPolicyContent()
{
return $this->policyContent;
}
/**
* Enables the ability to use Constraint Templates that reference to objects
* other than the object currently being evaluated.
*
* @param bool $referentialRulesEnabled
*/
public function setReferentialRulesEnabled($referentialRulesEnabled)
{
$this->referentialRulesEnabled = $referentialRulesEnabled;
}
/**
* @return bool
*/
public function getReferentialRulesEnabled()
{
return $this->referentialRulesEnabled;
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(PolicyControllerHubConfig::class, 'Google_Service_GKEHub_PolicyControllerHubConfig');
← Back