📄 Source: WireProperties.php
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\Compute;
class WireProperties extends \Google\Model
{
/**
* Configures a separate unmetered bandwidth allocation (and associated
* charges) for each wire in the group.
*/
public const BANDWIDTH_ALLOCATION_ALLOCATE_PER_WIRE = 'ALLOCATE_PER_WIRE';
/**
* This is the default behavior. Configures one unmetered bandwidth allocation
* for the wire group. The unmetered bandwidth is divided equally across each
* wire in the group, but dynamic throttling reallocates unused unmetered
* bandwidth from unused or underused wires to other wires in the group.
*/
public const BANDWIDTH_ALLOCATION_SHARED_WITH_WIRE_GROUP = 'SHARED_WITH_WIRE_GROUP';
/**
* Set the port line protocol down when inline probes detect a fault. This
* setting is only permitted on port mode pseudowires.
*/
public const FAULT_RESPONSE_DISABLE_PORT = 'DISABLE_PORT';
/**
* Default.
*/
public const FAULT_RESPONSE_NONE = 'NONE';
/**
* The configuration of the bandwidth allocation, one of the following:
* - ALLOCATE_PER_WIRE: configures a separate unmetered bandwidth allocation
* (and associated charges) for each wire in the group. -
* SHARED_WITH_WIRE_GROUP: this is the default behavior, which configures
* one unmetered bandwidth allocation for the wire group. The unmetered
* bandwidth is divided equally across each wire in the group, but dynamic
* throttling reallocates unused unmetered bandwidth from unused or underused
* wires to other wires in the group.
*
* @var string
*/
public $bandwidthAllocation;
/**
* The unmetered bandwidth in Gigabits per second, using decimal units. `10`
* is 10 Gbps, `100` is 100 Gbps. The bandwidth must be greater than 0.
*
* @var string
*/
public $bandwidthUnmetered;
/**
* Response when a fault is detected in a pseudowire: - NONE: default.
* - DISABLE_PORT: set the port line protocol down when inline probes
* detect a fault. This setting is only permitted on port mode pseudowires.
*
* @var string
*/
public $faultResponse;
/**
* The configuration of the bandwidth allocation, one of the following:
* - ALLOCATE_PER_WIRE: configures a separate unmetered bandwidth allocation
* (and associated charges) for each wire in the group. -
* SHARED_WITH_WIRE_GROUP: this is the default behavior, which configures
* one unmetered bandwidth allocation for the wire group. The unmetered
* bandwidth is divided equally across each wire in the group, but dynamic
* throttling reallocates unused unmetered bandwidth from unused or underused
* wires to other wires in the group.
*
* Accepted values: ALLOCATE_PER_WIRE, SHARED_WITH_WIRE_GROUP
*
* @param self::BANDWIDTH_ALLOCATION_* $bandwidthAllocation
*/
public function setBandwidthAllocation($bandwidthAllocation)
{
$this->bandwidthAllocation = $bandwidthAllocation;
}
/**
* @return self::BANDWIDTH_ALLOCATION_*
*/
public function getBandwidthAllocation()
{
return $this->bandwidthAllocation;
}
/**
* The unmetered bandwidth in Gigabits per second, using decimal units. `10`
* is 10 Gbps, `100` is 100 Gbps. The bandwidth must be greater than 0.
*
* @param string $bandwidthUnmetered
*/
public function setBandwidthUnmetered($bandwidthUnmetered)
{
$this->bandwidthUnmetered = $bandwidthUnmetered;
}
/**
* @return string
*/
public function getBandwidthUnmetered()
{
return $this->bandwidthUnmetered;
}
/**
* Response when a fault is detected in a pseudowire: - NONE: default.
* - DISABLE_PORT: set the port line protocol down when inline probes
* detect a fault. This setting is only permitted on port mode pseudowires.
*
* Accepted values: DISABLE_PORT, NONE
*
* @param self::FAULT_RESPONSE_* $faultResponse
*/
public function setFaultResponse($faultResponse)
{
$this->faultResponse = $faultResponse;
}
/**
* @return self::FAULT_RESPONSE_*
*/
public function getFaultResponse()
{
return $this->faultResponse;
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(WireProperties::class, 'Google_Service_Compute_WireProperties');
← Back