📄 Source: ReservationSubBlocks.php
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\Compute\Resource;
use Google\Service\Compute\Operation;
use Google\Service\Compute\Policy;
use Google\Service\Compute\ReservationSubBlocksGetResponse;
use Google\Service\Compute\ReservationSubBlocksGetVersionRequest;
use Google\Service\Compute\ReservationSubBlocksListResponse;
use Google\Service\Compute\ReservationSubBlocksReportFaultyRequest;
use Google\Service\Compute\TestPermissionsRequest;
use Google\Service\Compute\TestPermissionsResponse;
use Google\Service\Compute\ZoneSetNestedPolicyRequest;
/**
* The "reservationSubBlocks" collection of methods.
* Typical usage is:
* <code>
* $computeService = new Google\Service\Compute(...);
* $reservationSubBlocks = $computeService->reservationSubBlocks;
* </code>
*/
class ReservationSubBlocks extends \Google\Service\Resource
{
/**
* Retrieves information about the specified reservation subBlock.
* (reservationSubBlocks.get)
*
* @param string $project Project ID for this request.
* @param string $zone Name of the zone for this request. Zone name should
* conform to RFC1035.
* @param string $parentName The name of the parent reservation and parent
* block. In the format of
* reservations/{reservation_name}/reservationBlocks/{reservation_block_name}
* @param string $reservationSubBlock The name of the reservation subBlock. Name
* should conform to RFC1035 or be a resource ID.
* @param array $optParams Optional parameters.
*
* @opt_param string view View of the subBlock.
* @return ReservationSubBlocksGetResponse
* @throws \Google\Service\Exception
*/
public function get($project, $zone, $parentName, $reservationSubBlock, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'parentName' => $parentName, 'reservationSubBlock' => $reservationSubBlock];
$params = array_merge($params, $optParams);
return $this->call('get', [$params], ReservationSubBlocksGetResponse::class);
}
/**
* Gets the access control policy for a resource. May be empty if no such policy
* or resource exists. (reservationSubBlocks.getIamPolicy)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $parentResource Name or id of parent resource of the resource
* for this request.
* @param string $resource Name or id of the resource for this request.
* @param array $optParams Optional parameters.
*
* @opt_param int optionsRequestedPolicyVersion Requested IAM Policy version.
* @return Policy
* @throws \Google\Service\Exception
*/
public function getIamPolicy($project, $zone, $parentResource, $resource, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'parentResource' => $parentResource, 'resource' => $resource];
$params = array_merge($params, $optParams);
return $this->call('getIamPolicy', [$params], Policy::class);
}
/**
* Allows customers to get SBOM versions of a reservation subBlock.
* (reservationSubBlocks.getVersion)
*
* @param string $project Project ID for this request.
* @param string $zone Name of the zone for this request. Zone name should
* conform to RFC1035.
* @param string $parentName The name of the parent reservation and parent
* block. In the format of
* reservations/{reservation_name}/reservationBlocks/{reservation_block_name}
* @param string $reservationSubBlock The name of the reservation subBlock. Name
* should conform to RFC1035 or be a resource ID.
* @param ReservationSubBlocksGetVersionRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function getVersion($project, $zone, $parentName, $reservationSubBlock, ReservationSubBlocksGetVersionRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'parentName' => $parentName, 'reservationSubBlock' => $reservationSubBlock, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('getVersion', [$params], Operation::class);
}
/**
* Retrieves a list of reservation subBlocks under a single reservation.
* (reservationSubBlocks.listReservationSubBlocks)
*
* @param string $project Project ID for this request.
* @param string $zone Name of the zone for this request. Zone name should
* conform to RFC1035.
* @param string $parentName The name of the parent reservation and parent
* block. In the format of
* reservations/{reservation_name}/reservationBlocks/{reservation_block_name}
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. Most Compute resources support two types of filter expressions:
* expressions that support regular expressions and expressions that follow API
* improvement proposal AIP-160. These two types of filter expressions cannot be
* mixed in one request.
*
* If you want to use AIP-160, your expression must specify the field name, an
* operator, and the value that you want to use for filtering. The value must be
* a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`,
* `<`, `<=`, `>=` or `:`.
*
* For example, if you are filtering Compute Engine instances, you can exclude
* instances named `example-instance` by specifying `name != example-instance`.
*
* The `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
*
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based onresource labels.
*
* To filter on multiple expressions, provide each separate expression within
* parentheses. For example: ``` (scheduling.automaticRestart = true)
* (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND`
* expression. However, you can include `AND` and `OR` expressions explicitly.
* For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel
* Broadwell") AND (scheduling.automaticRestart = true) ```
*
* If you want to use a regular expression, use the `eq` (equal) or `ne` (not
* equal) operator against a single un-parenthesized expression with or without
* quotes or against multiple parenthesized expressions. Examples:
*
* `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'`
* `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2
* ne "literal")`
*
* The literal value is interpreted as a regular expression using GoogleRE2
* library syntax. The literal value must match the entire field.
*
* For example, to filter for instances that do not end with name "instance",
* you would use `name ne .*instance`.
*
* You cannot combine constraints on multiple fields using regular expressions.
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name.
*
* You can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first.
*
* Currently, only sorting by `name` or `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
*
* For example, when partial success behavior is enabled, aggregatedList for a
* single zone scope either returns all resources in the zone or no resources,
* with an error code.
* @return ReservationSubBlocksListResponse
* @throws \Google\Service\Exception
*/
public function listReservationSubBlocks($project, $zone, $parentName, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'parentName' => $parentName];
$params = array_merge($params, $optParams);
return $this->call('list', [$params], ReservationSubBlocksListResponse::class);
}
/**
* Allows customers to perform maintenance on a reservation subBlock
* (reservationSubBlocks.performMaintenance)
*
* @param string $project Project ID for this request.
* @param string $zone Name of the zone for this request. Zone name should
* conform to RFC1035.
* @param string $parentName The name of the parent reservation and parent
* block. In the format of
* reservations/{reservation_name}/reservationBlocks/{reservation_block_name}
* @param string $reservationSubBlock The name of the reservation subBlock. Name
* should conform to RFC1035 or be a resource ID.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function performMaintenance($project, $zone, $parentName, $reservationSubBlock, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'parentName' => $parentName, 'reservationSubBlock' => $reservationSubBlock];
$params = array_merge($params, $optParams);
return $this->call('performMaintenance', [$params], Operation::class);
}
/**
* Allows customers to report a faulty subBlock.
* (reservationSubBlocks.reportFaulty)
*
* @param string $project Project ID for this request.
* @param string $zone Name of the zone for this request. Zone name should
* conform to RFC1035.
* @param string $parentName The name of the parent reservation and parent
* block. In the format of
* reservations/{reservation_name}/reservationBlocks/{reservation_block_name}
* @param string $reservationSubBlock The name of the reservation subBlock. Name
* should conform to RFC1035 or be a resource ID.
* @param ReservationSubBlocksReportFaultyRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function reportFaulty($project, $zone, $parentName, $reservationSubBlock, ReservationSubBlocksReportFaultyRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'parentName' => $parentName, 'reservationSubBlock' => $reservationSubBlock, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('reportFaulty', [$params], Operation::class);
}
/**
* Sets the access control policy on the specified resource. Replaces any
* existing policy. (reservationSubBlocks.setIamPolicy)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $parentResource Name or id of parent resource of the resource
* for this request.
* @param string $resource Name or id of the resource for this request.
* @param ZoneSetNestedPolicyRequest $postBody
* @param array $optParams Optional parameters.
* @return Policy
* @throws \Google\Service\Exception
*/
public function setIamPolicy($project, $zone, $parentResource, $resource, ZoneSetNestedPolicyRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'parentResource' => $parentResource, 'resource' => $resource, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setIamPolicy', [$params], Policy::class);
}
/**
* Returns permissions that a caller has on the specified resource.
* (reservationSubBlocks.testIamPermissions)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $parentResource Name or id of parent resource of the resource
* for this request.
* @param string $resource Name or id of the resource for this request.
* @param TestPermissionsRequest $postBody
* @param array $optParams Optional parameters.
* @return TestPermissionsResponse
* @throws \Google\Service\Exception
*/
public function testIamPermissions($project, $zone, $parentResource, $resource, TestPermissionsRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'parentResource' => $parentResource, 'resource' => $resource, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('testIamPermissions', [$params], TestPermissionsResponse::class);
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(ReservationSubBlocks::class, 'Google_Service_Compute_Resource_ReservationSubBlocks');
← Back