📄 Source: RegionBackendServices.php
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\Compute\Resource;
use Google\Service\Compute\BackendService;
use Google\Service\Compute\BackendServiceGroupHealth;
use Google\Service\Compute\BackendServiceList;
use Google\Service\Compute\BackendServiceListUsable;
use Google\Service\Compute\Operation;
use Google\Service\Compute\Policy;
use Google\Service\Compute\RegionSetPolicyRequest;
use Google\Service\Compute\ResourceGroupReference;
use Google\Service\Compute\SecurityPolicyReference;
use Google\Service\Compute\TestPermissionsRequest;
use Google\Service\Compute\TestPermissionsResponse;
/**
* The "regionBackendServices" collection of methods.
* Typical usage is:
* <code>
* $computeService = new Google\Service\Compute(...);
* $regionBackendServices = $computeService->regionBackendServices;
* </code>
*/
class RegionBackendServices extends \Google\Service\Resource
{
/**
* Deletes the specified regional BackendService resource.
* (regionBackendServices.delete)
*
* @param string $project Project ID for this request.
* @param string $region Name of the region scoping this request.
* @param string $backendService Name of the BackendService resource to delete.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function delete($project, $region, $backendService, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'backendService' => $backendService];
$params = array_merge($params, $optParams);
return $this->call('delete', [$params], Operation::class);
}
/**
* Returns the specified regional BackendService resource.
* (regionBackendServices.get)
*
* @param string $project Project ID for this request.
* @param string $region Name of the region scoping this request.
* @param string $backendService Name of the BackendService resource to return.
* @param array $optParams Optional parameters.
* @return BackendService
* @throws \Google\Service\Exception
*/
public function get($project, $region, $backendService, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'backendService' => $backendService];
$params = array_merge($params, $optParams);
return $this->call('get', [$params], BackendService::class);
}
/**
* Gets the most recent health check results for this regional BackendService.
* (regionBackendServices.getHealth)
*
* @param string $project
* @param string $region Name of the region scoping this request.
* @param string $backendService Name of the BackendService resource for which
* to get health.
* @param ResourceGroupReference $postBody
* @param array $optParams Optional parameters.
* @return BackendServiceGroupHealth
* @throws \Google\Service\Exception
*/
public function getHealth($project, $region, $backendService, ResourceGroupReference $postBody, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'backendService' => $backendService, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('getHealth', [$params], BackendServiceGroupHealth::class);
}
/**
* Gets the access control policy for a resource. May be empty if no such policy
* or resource exists. (regionBackendServices.getIamPolicy)
*
* @param string $project Project ID for this request.
* @param string $region The name of the region for this request.
* @param string $resource Name or id of the resource for this request.
* @param array $optParams Optional parameters.
*
* @opt_param int optionsRequestedPolicyVersion Requested IAM Policy version.
* @return Policy
* @throws \Google\Service\Exception
*/
public function getIamPolicy($project, $region, $resource, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'resource' => $resource];
$params = array_merge($params, $optParams);
return $this->call('getIamPolicy', [$params], Policy::class);
}
/**
* Creates a regional BackendService resource in the specified project using the
* data included in the request. For more information, see Backend services
* overview. (regionBackendServices.insert)
*
* @param string $project Project ID for this request.
* @param string $region Name of the region scoping this request.
* @param BackendService $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function insert($project, $region, BackendService $postBody, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('insert', [$params], Operation::class);
}
/**
* Retrieves the list of regional BackendService resources available to the
* specified project in the given region.
* (regionBackendServices.listRegionBackendServices)
*
* @param string $project Project ID for this request.
* @param string $region Name of the region scoping this request.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. Most Compute resources support two types of filter expressions:
* expressions that support regular expressions and expressions that follow API
* improvement proposal AIP-160. These two types of filter expressions cannot be
* mixed in one request.
*
* If you want to use AIP-160, your expression must specify the field name, an
* operator, and the value that you want to use for filtering. The value must be
* a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`,
* `<`, `<=`, `>=` or `:`.
*
* For example, if you are filtering Compute Engine instances, you can exclude
* instances named `example-instance` by specifying `name != example-instance`.
*
* The `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
*
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based onresource labels.
*
* To filter on multiple expressions, provide each separate expression within
* parentheses. For example: ``` (scheduling.automaticRestart = true)
* (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND`
* expression. However, you can include `AND` and `OR` expressions explicitly.
* For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel
* Broadwell") AND (scheduling.automaticRestart = true) ```
*
* If you want to use a regular expression, use the `eq` (equal) or `ne` (not
* equal) operator against a single un-parenthesized expression with or without
* quotes or against multiple parenthesized expressions. Examples:
*
* `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'`
* `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2
* ne "literal")`
*
* The literal value is interpreted as a regular expression using GoogleRE2
* library syntax. The literal value must match the entire field.
*
* For example, to filter for instances that do not end with name "instance",
* you would use `name ne .*instance`.
*
* You cannot combine constraints on multiple fields using regular expressions.
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name.
*
* You can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first.
*
* Currently, only sorting by `name` or `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
*
* For example, when partial success behavior is enabled, aggregatedList for a
* single zone scope either returns all resources in the zone or no resources,
* with an error code.
* @return BackendServiceList
* @throws \Google\Service\Exception
*/
public function listRegionBackendServices($project, $region, $optParams = [])
{
$params = ['project' => $project, 'region' => $region];
$params = array_merge($params, $optParams);
return $this->call('list', [$params], BackendServiceList::class);
}
/**
* Retrieves a list of all usable backend services in the specified project in
* the given region. (regionBackendServices.listUsable)
*
* @param string $project Project ID for this request.
* @param string $region Name of the region scoping this request. It must be a
* string that meets the requirements in RFC1035.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. Most Compute resources support two types of filter expressions:
* expressions that support regular expressions and expressions that follow API
* improvement proposal AIP-160. These two types of filter expressions cannot be
* mixed in one request.
*
* If you want to use AIP-160, your expression must specify the field name, an
* operator, and the value that you want to use for filtering. The value must be
* a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`,
* `<`, `<=`, `>=` or `:`.
*
* For example, if you are filtering Compute Engine instances, you can exclude
* instances named `example-instance` by specifying `name != example-instance`.
*
* The `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
*
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based onresource labels.
*
* To filter on multiple expressions, provide each separate expression within
* parentheses. For example: ``` (scheduling.automaticRestart = true)
* (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND`
* expression. However, you can include `AND` and `OR` expressions explicitly.
* For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel
* Broadwell") AND (scheduling.automaticRestart = true) ```
*
* If you want to use a regular expression, use the `eq` (equal) or `ne` (not
* equal) operator against a single un-parenthesized expression with or without
* quotes or against multiple parenthesized expressions. Examples:
*
* `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'`
* `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2
* ne "literal")`
*
* The literal value is interpreted as a regular expression using GoogleRE2
* library syntax. The literal value must match the entire field.
*
* For example, to filter for instances that do not end with name "instance",
* you would use `name ne .*instance`.
*
* You cannot combine constraints on multiple fields using regular expressions.
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name.
*
* You can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first.
*
* Currently, only sorting by `name` or `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
*
* For example, when partial success behavior is enabled, aggregatedList for a
* single zone scope either returns all resources in the zone or no resources,
* with an error code.
* @return BackendServiceListUsable
* @throws \Google\Service\Exception
*/
public function listUsable($project, $region, $optParams = [])
{
$params = ['project' => $project, 'region' => $region];
$params = array_merge($params, $optParams);
return $this->call('listUsable', [$params], BackendServiceListUsable::class);
}
/**
* Updates the specified regional BackendService resource with the data included
* in the request. For more information, see Understanding backend services
* This method supports PATCH semantics and uses the JSON merge patch format and
* processing rules. (regionBackendServices.patch)
*
* @param string $project Project ID for this request.
* @param string $region Name of the region scoping this request.
* @param string $backendService Name of the BackendService resource to patch.
* @param BackendService $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function patch($project, $region, $backendService, BackendService $postBody, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'backendService' => $backendService, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('patch', [$params], Operation::class);
}
/**
* Sets the access control policy on the specified resource. Replaces any
* existing policy. (regionBackendServices.setIamPolicy)
*
* @param string $project Project ID for this request.
* @param string $region The name of the region for this request.
* @param string $resource Name or id of the resource for this request.
* @param RegionSetPolicyRequest $postBody
* @param array $optParams Optional parameters.
* @return Policy
* @throws \Google\Service\Exception
*/
public function setIamPolicy($project, $region, $resource, RegionSetPolicyRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'resource' => $resource, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setIamPolicy', [$params], Policy::class);
}
/**
* Sets the Google Cloud Armor security policy for the specified backend
* service. For more information, seeGoogle Cloud Armor Overview
* (regionBackendServices.setSecurityPolicy)
*
* @param string $project Project ID for this request.
* @param string $region Name of the region scoping this request.
* @param string $backendService Name of the BackendService resource to which
* the security policy should be set. The name should conform to RFC1035.
* @param SecurityPolicyReference $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function setSecurityPolicy($project, $region, $backendService, SecurityPolicyReference $postBody, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'backendService' => $backendService, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setSecurityPolicy', [$params], Operation::class);
}
/**
* Returns permissions that a caller has on the specified resource.
* (regionBackendServices.testIamPermissions)
*
* @param string $project Project ID for this request.
* @param string $region The name of the region for this request.
* @param string $resource Name or id of the resource for this request.
* @param TestPermissionsRequest $postBody
* @param array $optParams Optional parameters.
* @return TestPermissionsResponse
* @throws \Google\Service\Exception
*/
public function testIamPermissions($project, $region, $resource, TestPermissionsRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'resource' => $resource, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('testIamPermissions', [$params], TestPermissionsResponse::class);
}
/**
* Updates the specified regional BackendService resource with the data included
* in the request. For more information, see Backend services overview.
* (regionBackendServices.update)
*
* @param string $project Project ID for this request.
* @param string $region Name of the region scoping this request.
* @param string $backendService Name of the BackendService resource to update.
* @param BackendService $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function update($project, $region, $backendService, BackendService $postBody, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'backendService' => $backendService, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('update', [$params], Operation::class);
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(RegionBackendServices::class, 'Google_Service_Compute_Resource_RegionBackendServices');
← Back