📄 Source: Disks.php
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\Compute\Resource;
use Google\Service\Compute\BulkInsertDiskResource;
use Google\Service\Compute\BulkZoneSetLabelsRequest;
use Google\Service\Compute\Disk;
use Google\Service\Compute\DiskAggregatedList;
use Google\Service\Compute\DiskList;
use Google\Service\Compute\DiskUpdateKmsKeyRequest;
use Google\Service\Compute\DisksAddResourcePoliciesRequest;
use Google\Service\Compute\DisksRemoveResourcePoliciesRequest;
use Google\Service\Compute\DisksResizeRequest;
use Google\Service\Compute\DisksStartAsyncReplicationRequest;
use Google\Service\Compute\DisksStopGroupAsyncReplicationResource;
use Google\Service\Compute\Operation;
use Google\Service\Compute\Policy;
use Google\Service\Compute\Snapshot;
use Google\Service\Compute\TestPermissionsRequest;
use Google\Service\Compute\TestPermissionsResponse;
use Google\Service\Compute\ZoneSetLabelsRequest;
use Google\Service\Compute\ZoneSetPolicyRequest;
/**
* The "disks" collection of methods.
* Typical usage is:
* <code>
* $computeService = new Google\Service\Compute(...);
* $disks = $computeService->disks;
* </code>
*/
class Disks extends \Google\Service\Resource
{
/**
* Adds existing resource policies to a disk. You can only add one policy which
* will be applied to this disk for scheduling snapshot creation.
* (disks.addResourcePolicies)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $disk The disk name for this request.
* @param DisksAddResourcePoliciesRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function addResourcePolicies($project, $zone, $disk, DisksAddResourcePoliciesRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'disk' => $disk, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('addResourcePolicies', [$params], Operation::class);
}
/**
* Retrieves an aggregated list of persistent disks.
*
* To prevent failure, it is recommended that you set the `returnPartialSuccess`
* parameter to `true`. (disks.aggregatedList)
*
* @param string $project Project ID for this request.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. Most Compute resources support two types of filter expressions:
* expressions that support regular expressions and expressions that follow API
* improvement proposal AIP-160. These two types of filter expressions cannot be
* mixed in one request.
*
* If you want to use AIP-160, your expression must specify the field name, an
* operator, and the value that you want to use for filtering. The value must be
* a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`,
* `<`, `<=`, `>=` or `:`.
*
* For example, if you are filtering Compute Engine instances, you can exclude
* instances named `example-instance` by specifying `name != example-instance`.
*
* The `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
*
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based onresource labels.
*
* To filter on multiple expressions, provide each separate expression within
* parentheses. For example: ``` (scheduling.automaticRestart = true)
* (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND`
* expression. However, you can include `AND` and `OR` expressions explicitly.
* For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel
* Broadwell") AND (scheduling.automaticRestart = true) ```
*
* If you want to use a regular expression, use the `eq` (equal) or `ne` (not
* equal) operator against a single un-parenthesized expression with or without
* quotes or against multiple parenthesized expressions. Examples:
*
* `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'`
* `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2
* ne "literal")`
*
* The literal value is interpreted as a regular expression using GoogleRE2
* library syntax. The literal value must match the entire field.
*
* For example, to filter for instances that do not end with name "instance",
* you would use `name ne .*instance`.
*
* You cannot combine constraints on multiple fields using regular expressions.
* @opt_param bool includeAllScopes Indicates whether every visible scope for
* each scope type (zone, region, global) should be included in the response.
* For new resource types added after this field, the flag has no effect as new
* resource types will always include every visible scope for each scope type in
* response. For resource types which predate this field, if this flag is
* omitted or false, only scopes of the scope types where the resource type is
* expected to be found will be included.
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name.
*
* You can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first.
*
* Currently, only sorting by `name` or `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
*
* For example, when partial success behavior is enabled, aggregatedList for a
* single zone scope either returns all resources in the zone or no resources,
* with an error code.
* @opt_param string serviceProjectNumber The Shared VPC service project id or
* service project number for which aggregated list request is invoked for
* subnetworks list-usable api.
* @return DiskAggregatedList
* @throws \Google\Service\Exception
*/
public function aggregatedList($project, $optParams = [])
{
$params = ['project' => $project];
$params = array_merge($params, $optParams);
return $this->call('aggregatedList', [$params], DiskAggregatedList::class);
}
/**
* Bulk create a set of disks. (disks.bulkInsert)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param BulkInsertDiskResource $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function bulkInsert($project, $zone, BulkInsertDiskResource $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('bulkInsert', [$params], Operation::class);
}
/**
* Sets the labels on many disks at once. To learn more about labels, read
* theLabeling Resources documentation. (disks.bulkSetLabels)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param BulkZoneSetLabelsRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @opt_param string resource Name or id of the resource for this request.
* @return Operation
* @throws \Google\Service\Exception
*/
public function bulkSetLabels($project, $zone, BulkZoneSetLabelsRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('bulkSetLabels', [$params], Operation::class);
}
/**
* Creates a snapshot of a specified persistent disk. For regular snapshot
* creation, consider using snapshots.insert instead, as that method supports
* more features, such as creating snapshots in a project different from the
* source disk project. (disks.createSnapshot)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $disk Name of the persistent disk to snapshot.
* @param Snapshot $postBody
* @param array $optParams Optional parameters.
*
* @opt_param bool guestFlush [Input Only] Whether to attempt an application
* consistent snapshot by informing the OS to prepare for the snapshot process.
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function createSnapshot($project, $zone, $disk, Snapshot $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'disk' => $disk, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('createSnapshot', [$params], Operation::class);
}
/**
* Deletes the specified persistent disk. Deleting a disk removes its data
* permanently and is irreversible. However, deleting a disk does not delete any
* snapshots previously made from the disk. You must separatelydelete snapshots.
* (disks.delete)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $disk Name of the persistent disk to delete.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function delete($project, $zone, $disk, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'disk' => $disk];
$params = array_merge($params, $optParams);
return $this->call('delete', [$params], Operation::class);
}
/**
* Returns the specified persistent disk. (disks.get)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $disk Name of the persistent disk to return.
* @param array $optParams Optional parameters.
* @return Disk
* @throws \Google\Service\Exception
*/
public function get($project, $zone, $disk, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'disk' => $disk];
$params = array_merge($params, $optParams);
return $this->call('get', [$params], Disk::class);
}
/**
* Gets the access control policy for a resource. May be empty if no such policy
* or resource exists. (disks.getIamPolicy)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $resource Name or id of the resource for this request.
* @param array $optParams Optional parameters.
*
* @opt_param int optionsRequestedPolicyVersion Requested IAM Policy version.
* @return Policy
* @throws \Google\Service\Exception
*/
public function getIamPolicy($project, $zone, $resource, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'resource' => $resource];
$params = array_merge($params, $optParams);
return $this->call('getIamPolicy', [$params], Policy::class);
}
/**
* Creates a persistent disk in the specified project using the data in the
* request. You can create a disk from a source (sourceImage, sourceSnapshot,
* orsourceDisk) or create an empty 500 GB data disk by omitting all properties.
* You can also create a disk that is larger than the default size by specifying
* the sizeGb property. (disks.insert)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param Disk $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @opt_param string sourceImage Source image to restore onto a disk. This field
* is optional.
* @return Operation
* @throws \Google\Service\Exception
*/
public function insert($project, $zone, Disk $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('insert', [$params], Operation::class);
}
/**
* Retrieves a list of persistent disks contained within the specified zone.
* (disks.listDisks)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. Most Compute resources support two types of filter expressions:
* expressions that support regular expressions and expressions that follow API
* improvement proposal AIP-160. These two types of filter expressions cannot be
* mixed in one request.
*
* If you want to use AIP-160, your expression must specify the field name, an
* operator, and the value that you want to use for filtering. The value must be
* a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`,
* `<`, `<=`, `>=` or `:`.
*
* For example, if you are filtering Compute Engine instances, you can exclude
* instances named `example-instance` by specifying `name != example-instance`.
*
* The `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
*
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based onresource labels.
*
* To filter on multiple expressions, provide each separate expression within
* parentheses. For example: ``` (scheduling.automaticRestart = true)
* (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND`
* expression. However, you can include `AND` and `OR` expressions explicitly.
* For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel
* Broadwell") AND (scheduling.automaticRestart = true) ```
*
* If you want to use a regular expression, use the `eq` (equal) or `ne` (not
* equal) operator against a single un-parenthesized expression with or without
* quotes or against multiple parenthesized expressions. Examples:
*
* `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'`
* `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2
* ne "literal")`
*
* The literal value is interpreted as a regular expression using GoogleRE2
* library syntax. The literal value must match the entire field.
*
* For example, to filter for instances that do not end with name "instance",
* you would use `name ne .*instance`.
*
* You cannot combine constraints on multiple fields using regular expressions.
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name.
*
* You can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first.
*
* Currently, only sorting by `name` or `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
*
* For example, when partial success behavior is enabled, aggregatedList for a
* single zone scope either returns all resources in the zone or no resources,
* with an error code.
* @return DiskList
* @throws \Google\Service\Exception
*/
public function listDisks($project, $zone, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone];
$params = array_merge($params, $optParams);
return $this->call('list', [$params], DiskList::class);
}
/**
* Removes resource policies from a disk. (disks.removeResourcePolicies)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $disk The disk name for this request.
* @param DisksRemoveResourcePoliciesRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function removeResourcePolicies($project, $zone, $disk, DisksRemoveResourcePoliciesRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'disk' => $disk, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('removeResourcePolicies', [$params], Operation::class);
}
/**
* Resizes the specified persistent disk. You can only increase the size of the
* disk. (disks.resize)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $disk The name of the persistent disk.
* @param DisksResizeRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function resize($project, $zone, $disk, DisksResizeRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'disk' => $disk, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('resize', [$params], Operation::class);
}
/**
* Sets the access control policy on the specified resource. Replaces any
* existing policy. (disks.setIamPolicy)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $resource Name or id of the resource for this request.
* @param ZoneSetPolicyRequest $postBody
* @param array $optParams Optional parameters.
* @return Policy
* @throws \Google\Service\Exception
*/
public function setIamPolicy($project, $zone, $resource, ZoneSetPolicyRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'resource' => $resource, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setIamPolicy', [$params], Policy::class);
}
/**
* Sets the labels on a disk. To learn more about labels, read theLabeling
* Resources documentation. (disks.setLabels)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $resource Name or id of the resource for this request.
* @param ZoneSetLabelsRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function setLabels($project, $zone, $resource, ZoneSetLabelsRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'resource' => $resource, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setLabels', [$params], Operation::class);
}
/**
* Starts asynchronous replication. Must be invoked on the primary disk.
* (disks.startAsyncReplication)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $disk The name of the persistent disk.
* @param DisksStartAsyncReplicationRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function startAsyncReplication($project, $zone, $disk, DisksStartAsyncReplicationRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'disk' => $disk, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('startAsyncReplication', [$params], Operation::class);
}
/**
* Stops asynchronous replication. Can be invoked either on the primary or on
* the secondary disk. (disks.stopAsyncReplication)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $disk The name of the persistent disk.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function stopAsyncReplication($project, $zone, $disk, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'disk' => $disk];
$params = array_merge($params, $optParams);
return $this->call('stopAsyncReplication', [$params], Operation::class);
}
/**
* Stops asynchronous replication for a consistency group of disks. Can be
* invoked either in the primary or secondary scope.
* (disks.stopGroupAsyncReplication)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request. This must be the
* zone of the primary or secondary disks in the consistency group.
* @param DisksStopGroupAsyncReplicationResource $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function stopGroupAsyncReplication($project, $zone, DisksStopGroupAsyncReplicationResource $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('stopGroupAsyncReplication', [$params], Operation::class);
}
/**
* Returns permissions that a caller has on the specified resource.
* (disks.testIamPermissions)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $resource Name or id of the resource for this request.
* @param TestPermissionsRequest $postBody
* @param array $optParams Optional parameters.
* @return TestPermissionsResponse
* @throws \Google\Service\Exception
*/
public function testIamPermissions($project, $zone, $resource, TestPermissionsRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'resource' => $resource, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('testIamPermissions', [$params], TestPermissionsResponse::class);
}
/**
* Updates the specified disk with the data included in the request. The update
* is performed only on selected fields included as part of update-mask.
* (disks.update)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $disk The disk name for this request.
* @param Disk $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string paths
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @opt_param string updateMask update_mask indicates fields to be updated as
* part of this request.
* @return Operation
* @throws \Google\Service\Exception
*/
public function update($project, $zone, $disk, Disk $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'disk' => $disk, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('update', [$params], Operation::class);
}
/**
* Rotates the customer-managed encryption key to the latest version for the
* specified persistent disk. (disks.updateKmsKey)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $disk Name of the Disk resource, should conform to RFC1035.
* @param DiskUpdateKmsKeyRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Operation
* @throws \Google\Service\Exception
*/
public function updateKmsKey($project, $zone, $disk, DiskUpdateKmsKeyRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'disk' => $disk, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('updateKmsKey', [$params], Operation::class);
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(Disks::class, 'Google_Service_Compute_Resource_Disks');
← Back