📄 Source: SasPortalInstallationParams.php
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\SASPortalTesting;
class SasPortalInstallationParams extends \Google\Model
{
/**
* Unspecified height type.
*/
public const HEIGHT_TYPE_HEIGHT_TYPE_UNSPECIFIED = 'HEIGHT_TYPE_UNSPECIFIED';
/**
* AGL height is measured relative to the ground level.
*/
public const HEIGHT_TYPE_HEIGHT_TYPE_AGL = 'HEIGHT_TYPE_AGL';
/**
* AMSL height is measured relative to the mean sea level.
*/
public const HEIGHT_TYPE_HEIGHT_TYPE_AMSL = 'HEIGHT_TYPE_AMSL';
/**
* Boresight direction of the horizontal plane of the antenna in degrees with
* respect to true north. The value of this parameter is an integer with a
* value between 0 and 359 inclusive. A value of 0 degrees means true north; a
* value of 90 degrees means east. This parameter is optional for Category A
* devices and conditional for Category B devices.
*
* @var int
*/
public $antennaAzimuth;
/**
* 3-dB antenna beamwidth of the antenna in the horizontal-plane in degrees.
* This parameter is an unsigned integer having a value between 0 and 360
* (degrees) inclusive; it is optional for Category A devices and conditional
* for Category B devices.
*
* @var int
*/
public $antennaBeamwidth;
/**
* Antenna downtilt in degrees and is an integer with a value between -90 and
* +90 inclusive; a negative value means the antenna is tilted up (above
* horizontal). This parameter is optional for Category A devices and
* conditional for Category B devices.
*
* @var int
*/
public $antennaDowntilt;
/**
* Peak antenna gain in dBi. This parameter is a double with a value between
* -127 and +128 (dBi) inclusive. Part of Release 2 to support floating-point
* value
*
* @var
*/
public $antennaGain;
/**
* If an external antenna is used, the antenna model is optionally provided in
* this field. The string has a maximum length of 128 octets.
*
* @var string
*/
public $antennaModel;
/**
* If present, this parameter specifies whether the CBSD is a CPE-CBSD or not.
*
* @var bool
*/
public $cpeCbsdIndication;
/**
* This parameter is the maximum device EIRP in units of dBm/10MHz and is an
* integer with a value between -127 and +47 (dBm/10 MHz) inclusive. If not
* included, SAS interprets it as maximum allowable EIRP in units of dBm/10MHz
* for device category.
*
* @var int
*/
public $eirpCapability;
/**
* Device antenna height in meters. When the `heightType` parameter value is
* "AGL", the antenna height should be given relative to ground level. When
* the `heightType` parameter value is "AMSL", it is given with respect to
* WGS84 datum.
*
* @var
*/
public $height;
/**
* Specifies how the height is measured.
*
* @var string
*/
public $heightType;
/**
* A positive number in meters to indicate accuracy of the device antenna
* horizontal location. This optional parameter should only be present if its
* value is less than the FCC requirement of 50 meters.
*
* @var
*/
public $horizontalAccuracy;
/**
* Whether the device antenna is indoor or not. `true`: indoor. `false`:
* outdoor.
*
* @var bool
*/
public $indoorDeployment;
/**
* Latitude of the device antenna location in degrees relative to the WGS 84
* datum. The allowed range is from -90.000000 to +90.000000. Positive values
* represent latitudes north of the equator; negative values south of the
* equator.
*
* @var
*/
public $latitude;
/**
* Longitude of the device antenna location in degrees relative to the WGS 84
* datum. The allowed range is from -180.000000 to +180.000000. Positive
* values represent longitudes east of the prime meridian; negative values
* west of the prime meridian.
*
* @var
*/
public $longitude;
/**
* A positive number in meters to indicate accuracy of the device antenna
* vertical location. This optional parameter should only be present if its
* value is less than the FCC requirement of 3 meters.
*
* @var
*/
public $verticalAccuracy;
/**
* Boresight direction of the horizontal plane of the antenna in degrees with
* respect to true north. The value of this parameter is an integer with a
* value between 0 and 359 inclusive. A value of 0 degrees means true north; a
* value of 90 degrees means east. This parameter is optional for Category A
* devices and conditional for Category B devices.
*
* @param int $antennaAzimuth
*/
public function setAntennaAzimuth($antennaAzimuth)
{
$this->antennaAzimuth = $antennaAzimuth;
}
/**
* @return int
*/
public function getAntennaAzimuth()
{
return $this->antennaAzimuth;
}
/**
* 3-dB antenna beamwidth of the antenna in the horizontal-plane in degrees.
* This parameter is an unsigned integer having a value between 0 and 360
* (degrees) inclusive; it is optional for Category A devices and conditional
* for Category B devices.
*
* @param int $antennaBeamwidth
*/
public function setAntennaBeamwidth($antennaBeamwidth)
{
$this->antennaBeamwidth = $antennaBeamwidth;
}
/**
* @return int
*/
public function getAntennaBeamwidth()
{
return $this->antennaBeamwidth;
}
/**
* Antenna downtilt in degrees and is an integer with a value between -90 and
* +90 inclusive; a negative value means the antenna is tilted up (above
* horizontal). This parameter is optional for Category A devices and
* conditional for Category B devices.
*
* @param int $antennaDowntilt
*/
public function setAntennaDowntilt($antennaDowntilt)
{
$this->antennaDowntilt = $antennaDowntilt;
}
/**
* @return int
*/
public function getAntennaDowntilt()
{
return $this->antennaDowntilt;
}
public function setAntennaGain($antennaGain)
{
$this->antennaGain = $antennaGain;
}
public function getAntennaGain()
{
return $this->antennaGain;
}
/**
* If an external antenna is used, the antenna model is optionally provided in
* this field. The string has a maximum length of 128 octets.
*
* @param string $antennaModel
*/
public function setAntennaModel($antennaModel)
{
$this->antennaModel = $antennaModel;
}
/**
* @return string
*/
public function getAntennaModel()
{
return $this->antennaModel;
}
/**
* If present, this parameter specifies whether the CBSD is a CPE-CBSD or not.
*
* @param bool $cpeCbsdIndication
*/
public function setCpeCbsdIndication($cpeCbsdIndication)
{
$this->cpeCbsdIndication = $cpeCbsdIndication;
}
/**
* @return bool
*/
public function getCpeCbsdIndication()
{
return $this->cpeCbsdIndication;
}
/**
* This parameter is the maximum device EIRP in units of dBm/10MHz and is an
* integer with a value between -127 and +47 (dBm/10 MHz) inclusive. If not
* included, SAS interprets it as maximum allowable EIRP in units of dBm/10MHz
* for device category.
*
* @param int $eirpCapability
*/
public function setEirpCapability($eirpCapability)
{
$this->eirpCapability = $eirpCapability;
}
/**
* @return int
*/
public function getEirpCapability()
{
return $this->eirpCapability;
}
public function setHeight($height)
{
$this->height = $height;
}
public function getHeight()
{
return $this->height;
}
/**
* Specifies how the height is measured.
*
* Accepted values: HEIGHT_TYPE_UNSPECIFIED, HEIGHT_TYPE_AGL, HEIGHT_TYPE_AMSL
*
* @param self::HEIGHT_TYPE_* $heightType
*/
public function setHeightType($heightType)
{
$this->heightType = $heightType;
}
/**
* @return self::HEIGHT_TYPE_*
*/
public function getHeightType()
{
return $this->heightType;
}
public function setHorizontalAccuracy($horizontalAccuracy)
{
$this->horizontalAccuracy = $horizontalAccuracy;
}
public function getHorizontalAccuracy()
{
return $this->horizontalAccuracy;
}
/**
* Whether the device antenna is indoor or not. `true`: indoor. `false`:
* outdoor.
*
* @param bool $indoorDeployment
*/
public function setIndoorDeployment($indoorDeployment)
{
$this->indoorDeployment = $indoorDeployment;
}
/**
* @return bool
*/
public function getIndoorDeployment()
{
return $this->indoorDeployment;
}
public function setLatitude($latitude)
{
$this->latitude = $latitude;
}
public function getLatitude()
{
return $this->latitude;
}
public function setLongitude($longitude)
{
$this->longitude = $longitude;
}
public function getLongitude()
{
return $this->longitude;
}
public function setVerticalAccuracy($verticalAccuracy)
{
$this->verticalAccuracy = $verticalAccuracy;
}
public function getVerticalAccuracy()
{
return $this->verticalAccuracy;
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(SasPortalInstallationParams::class, 'Google_Service_SASPortalTesting_SasPortalInstallationParams');
← Back