📄 Source: Subnetwork.php
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\Compute;
class Subnetwork extends \Google\Collection
{
/**
* VMs on this subnet will be assigned IPv6 addresses that are accessible via
* the Internet, as well as the VPC network.
*/
public const IPV6_ACCESS_TYPE_EXTERNAL = 'EXTERNAL';
/**
* VMs on this subnet will be assigned IPv6 addresses that are only accessible
* over the VPC network.
*/
public const IPV6_ACCESS_TYPE_INTERNAL = 'INTERNAL';
public const IPV6_GCE_ENDPOINT_VM_AND_FR = 'VM_AND_FR';
public const IPV6_GCE_ENDPOINT_VM_ONLY = 'VM_ONLY';
/**
* Disable private IPv6 access to/from Google services.
*/
public const PRIVATE_IPV6_GOOGLE_ACCESS_DISABLE_GOOGLE_ACCESS = 'DISABLE_GOOGLE_ACCESS';
/**
* Bidirectional private IPv6 access to/from Google services.
*/
public const PRIVATE_IPV6_GOOGLE_ACCESS_ENABLE_BIDIRECTIONAL_ACCESS_TO_GOOGLE = 'ENABLE_BIDIRECTIONAL_ACCESS_TO_GOOGLE';
/**
* Outbound private IPv6 access from VMs in this subnet to Google services.
*/
public const PRIVATE_IPV6_GOOGLE_ACCESS_ENABLE_OUTBOUND_VM_ACCESS_TO_GOOGLE = 'ENABLE_OUTBOUND_VM_ACCESS_TO_GOOGLE';
/**
* Subnet reserved for Global Envoy-based Load Balancing.
*/
public const PURPOSE_GLOBAL_MANAGED_PROXY = 'GLOBAL_MANAGED_PROXY';
/**
* Subnet reserved for Internal HTTP(S) Load Balancing. This is a legacy
* purpose, please use REGIONAL_MANAGED_PROXY instead.
*/
public const PURPOSE_INTERNAL_HTTPS_LOAD_BALANCER = 'INTERNAL_HTTPS_LOAD_BALANCER';
/**
* Subnetwork will be used for Migration from one peered VPC to another. (a
* transient state of subnetwork while migrating resources from one project to
* another).
*/
public const PURPOSE_PEER_MIGRATION = 'PEER_MIGRATION';
/**
* Regular user created or automatically created subnet.
*/
public const PURPOSE_PRIVATE = 'PRIVATE';
/**
* Subnetwork used as source range for Private NAT Gateways.
*/
public const PURPOSE_PRIVATE_NAT = 'PRIVATE_NAT';
/**
* Regular user created or automatically created subnet.
*/
public const PURPOSE_PRIVATE_RFC_1918 = 'PRIVATE_RFC_1918';
/**
* Subnetworks created for Private Service Connect in the producer network.
*/
public const PURPOSE_PRIVATE_SERVICE_CONNECT = 'PRIVATE_SERVICE_CONNECT';
/**
* Subnetwork used for Regional Envoy-based Load Balancing.
*/
public const PURPOSE_REGIONAL_MANAGED_PROXY = 'REGIONAL_MANAGED_PROXY';
/**
* All ranges assigned to the VM NIC will respond to ARP.
*/
public const RESOLVE_SUBNET_MASK_ARP_ALL_RANGES = 'ARP_ALL_RANGES';
/**
* Only the primary range of the VM NIC will respond to ARP.
*/
public const RESOLVE_SUBNET_MASK_ARP_PRIMARY_RANGE = 'ARP_PRIMARY_RANGE';
/**
* The ACTIVE subnet that is currently used.
*/
public const ROLE_ACTIVE = 'ACTIVE';
/**
* The BACKUP subnet that could be promoted to ACTIVE.
*/
public const ROLE_BACKUP = 'BACKUP';
/**
* New VMs in this subnet can have both IPv4 and IPv6 addresses.
*/
public const STACK_TYPE_IPV4_IPV6 = 'IPV4_IPV6';
/**
* New VMs in this subnet will only be assigned IPv4 addresses.
*/
public const STACK_TYPE_IPV4_ONLY = 'IPV4_ONLY';
/**
* New VMs in this subnet will only be assigned IPv6 addresses.
*/
public const STACK_TYPE_IPV6_ONLY = 'IPV6_ONLY';
/**
* Subnetwork is being drained.
*/
public const STATE_DRAINING = 'DRAINING';
/**
* Subnetwork is ready for use.
*/
public const STATE_READY = 'READY';
protected $collection_key = 'systemReservedInternalIpv6Ranges';
/**
* Whether this subnetwork's ranges can conflict with existing custom routes.
* Setting this to true allows this subnetwork's primary and secondary ranges
* to overlap with (and contain) custom routes that have already been
* configured on the corresponding network.
*
* For example if a static route has range 10.1.0.0/16, a subnet range
* 10.0.0.0/8 could only be created if allow_conflicting_routes=true.
*
* Overlapping is only allowed on subnetwork operations; routes whose ranges
* conflict with this subnetwork's ranges won't be allowed unless
* route.allow_conflicting_subnetworks is set to true.
*
* Typically packets destined to IPs within the subnetwork (which may contain
* private/sensitive data) are prevented from leaving the virtual network.
* Setting this field to true will disable this feature.
*
* The default value is false and applies to all existing subnetworks and
* automatically created subnetworks.
*
* @var bool
*/
public $allowSubnetCidrRoutesOverlap;
/**
* Output only. [Output Only] Creation timestamp inRFC3339 text format.
*
* @var string
*/
public $creationTimestamp;
/**
* An optional description of this resource. Provide this property when you
* create the resource. This field can be set only at resource creation time.
*
* @var string
*/
public $description;
/**
* Whether to enable flow logging for this subnetwork. If this field is not
* explicitly set, it will not appear in get listings. If not set the default
* behavior is determined by the org policy, if there is no org policy
* specified, then it will default to disabled. This field isn't supported if
* the subnet purpose field is set toREGIONAL_MANAGED_PROXY. It is recommended
* to uselogConfig.enable field instead.
*
* @var bool
*/
public $enableFlowLogs;
/**
* The external IPv6 address range that is owned by this subnetwork.
*
* @var string
*/
public $externalIpv6Prefix;
/**
* Fingerprint of this resource. A hash of the contents stored in this object.
* This field is used in optimistic locking. This field will be ignored when
* inserting a Subnetwork. An up-to-date fingerprint must be provided in order
* to update the Subnetwork, otherwise the request will fail with error 412
* conditionNotMet.
*
* To see the latest fingerprint, make a get() request to retrieve a
* Subnetwork.
*
* @var string
*/
public $fingerprint;
/**
* Output only. [Output Only] The gateway address for default routes to reach
* destination addresses outside this subnetwork.
*
* @var string
*/
public $gatewayAddress;
/**
* Output only. [Output Only] The unique identifier for the resource. This
* identifier is defined by the server.
*
* @var string
*/
public $id;
/**
* The internal IPv6 address range that is owned by this subnetwork.
*
* @var string
*/
public $internalIpv6Prefix;
/**
* The range of internal addresses that are owned by this subnetwork. Provide
* this property when you create the subnetwork. For example,10.0.0.0/8 or
* 100.64.0.0/10. Ranges must be unique and non-overlapping within a network.
* Only IPv4 is supported. This field is set at resource creation time. The
* range can be any range listed in theValid ranges list. The range can be
* expanded after creation usingexpandIpCidrRange.
*
* @var string
*/
public $ipCidrRange;
/**
* Reference to the source of IP, like a PublicDelegatedPrefix (PDP) for
* BYOIP. The PDP must be a sub-PDP in EXTERNAL_IPV6_SUBNETWORK_CREATION or
* INTERNAL_IPV6_SUBNETWORK_CREATION mode.
*
* Use one of the following formats to specify a sub-PDP when creating a dual
* stack or IPv6-only subnetwork with external access using BYOIP: -
* Full resource URL, as inhttps://www.googleapis.com/compute/v1/projects/proj
* ectId/regions/region/publicDelegatedPrefixes/sub-pdp-name - Partial
* URL, as in -
* projects/projectId/regions/region/publicDelegatedPrefixes/sub-pdp-name
* - regions/region/publicDelegatedPrefixes/sub-pdp-name
*
* @var string
*/
public $ipCollection;
/**
* The access type of IPv6 address this subnet holds. It's immutable and can
* only be specified during creation or the first time the subnet is updated
* into IPV4_IPV6 dual stack.
*
* @var string
*/
public $ipv6AccessType;
/**
* Output only. [Output Only] This field is for internal use.
*
* @var string
*/
public $ipv6CidrRange;
/**
* Output only. [Output Only] Possible endpoints of this subnetwork. It can be
* one of the following: - VM_ONLY: The subnetwork can be used for
* creating instances and IPv6 addresses with VM endpoint type. Such a
* subnetwork gets external IPv6 ranges from a public delegated prefix and
* cannot be used to create NetLb. - VM_AND_FR: The subnetwork can be used
* for creating both VM instances and Forwarding Rules. It can also be used
* to reserve IPv6 addresses with both VM and FR endpoint types. Such a
* subnetwork gets its IPv6 range from Google IP Pool directly.
*
* @var string
*/
public $ipv6GceEndpoint;
/**
* Output only. [Output Only] Type of the resource. Always compute#subnetwork
* for Subnetwork resources.
*
* @var string
*/
public $kind;
protected $logConfigType = SubnetworkLogConfig::class;
protected $logConfigDataType = '';
/**
* The name of the resource, provided by the client when initially creating
* the resource. The name must be 1-63 characters long, and comply
* withRFC1035. Specifically, the name must be 1-63 characters long and match
* the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first
* character must be a lowercase letter, and all following characters must be
* a dash, lowercase letter, or digit, except the last character, which cannot
* be a dash.
*
* @var string
*/
public $name;
/**
* The URL of the network to which this subnetwork belongs, provided by the
* client when initially creating the subnetwork. This field can be set only
* at resource creation time.
*
* @var string
*/
public $network;
protected $paramsType = SubnetworkParams::class;
protected $paramsDataType = '';
/**
* Whether the VMs in this subnet can access Google services without assigned
* external IP addresses. This field can be both set at resource creation time
* and updated using setPrivateIpGoogleAccess.
*
* @var bool
*/
public $privateIpGoogleAccess;
/**
* This field is for internal use.
*
* This field can be both set at resource creation time and updated
* usingpatch.
*
* @var string
*/
public $privateIpv6GoogleAccess;
/**
* @var string
*/
public $purpose;
/**
* URL of the region where the Subnetwork resides. This field can be set only
* at resource creation time.
*
* @var string
*/
public $region;
/**
* The URL of the reserved internal range.
*
* @var string
*/
public $reservedInternalRange;
/**
* Configures subnet mask resolution for this subnetwork.
*
* @var string
*/
public $resolveSubnetMask;
/**
* The role of subnetwork. Currently, this field is only used when purpose is
* set to GLOBAL_MANAGED_PROXY orREGIONAL_MANAGED_PROXY. The value can be set
* toACTIVE or BACKUP. An ACTIVE subnetwork is one that is currently being
* used for Envoy-based load balancers in a region. A BACKUP subnetwork is one
* that is ready to be promoted to ACTIVE or is currently draining. This field
* can be updated with a patch request.
*
* @var string
*/
public $role;
protected $secondaryIpRangesType = SubnetworkSecondaryRange::class;
protected $secondaryIpRangesDataType = 'array';
/**
* [Output Only] Server-defined URL for the resource.
*
* @var string
*/
public $selfLink;
/**
* The stack type for the subnet. If set to IPV4_ONLY, new VMs in the subnet
* are assigned IPv4 addresses only. If set toIPV4_IPV6, new VMs in the subnet
* can be assigned both IPv4 and IPv6 addresses. If not specified, IPV4_ONLY
* is used.
*
* This field can be both set at resource creation time and updated
* usingpatch.
*
* @var string
*/
public $stackType;
/**
* Output only. [Output Only] The state of the subnetwork, which can be one of
* the following values:READY: Subnetwork is created and ready to useDRAINING:
* only applicable to subnetworks that have the purpose set to
* INTERNAL_HTTPS_LOAD_BALANCER and indicates that connections to the load
* balancer are being drained. A subnetwork that is draining cannot be used or
* modified until it reaches a status ofREADY
*
* @var string
*/
public $state;
/**
* Output only. [Output Only] The array of external IPv6 network ranges
* reserved from the subnetwork's external IPv6 range for system use.
*
* @var string[]
*/
public $systemReservedExternalIpv6Ranges;
/**
* Output only. [Output Only] The array of internal IPv6 network ranges
* reserved from the subnetwork's internal IPv6 range for system use.
*
* @var string[]
*/
public $systemReservedInternalIpv6Ranges;
protected $utilizationDetailsType = SubnetworkUtilizationDetails::class;
protected $utilizationDetailsDataType = '';
/**
* Whether this subnetwork's ranges can conflict with existing custom routes.
* Setting this to true allows this subnetwork's primary and secondary ranges
* to overlap with (and contain) custom routes that have already been
* configured on the corresponding network.
*
* For example if a static route has range 10.1.0.0/16, a subnet range
* 10.0.0.0/8 could only be created if allow_conflicting_routes=true.
*
* Overlapping is only allowed on subnetwork operations; routes whose ranges
* conflict with this subnetwork's ranges won't be allowed unless
* route.allow_conflicting_subnetworks is set to true.
*
* Typically packets destined to IPs within the subnetwork (which may contain
* private/sensitive data) are prevented from leaving the virtual network.
* Setting this field to true will disable this feature.
*
* The default value is false and applies to all existing subnetworks and
* automatically created subnetworks.
*
* @param bool $allowSubnetCidrRoutesOverlap
*/
public function setAllowSubnetCidrRoutesOverlap($allowSubnetCidrRoutesOverlap)
{
$this->allowSubnetCidrRoutesOverlap = $allowSubnetCidrRoutesOverlap;
}
/**
* @return bool
*/
public function getAllowSubnetCidrRoutesOverlap()
{
return $this->allowSubnetCidrRoutesOverlap;
}
/**
* Output only. [Output Only] Creation timestamp inRFC3339 text format.
*
* @param string $creationTimestamp
*/
public function setCreationTimestamp($creationTimestamp)
{
$this->creationTimestamp = $creationTimestamp;
}
/**
* @return string
*/
public function getCreationTimestamp()
{
return $this->creationTimestamp;
}
/**
* An optional description of this resource. Provide this property when you
* create the resource. This field can be set only at resource creation time.
*
* @param string $description
*/
public function setDescription($description)
{
$this->description = $description;
}
/**
* @return string
*/
public function getDescription()
{
return $this->description;
}
/**
* Whether to enable flow logging for this subnetwork. If this field is not
* explicitly set, it will not appear in get listings. If not set the default
* behavior is determined by the org policy, if there is no org policy
* specified, then it will default to disabled. This field isn't supported if
* the subnet purpose field is set toREGIONAL_MANAGED_PROXY. It is recommended
* to uselogConfig.enable field instead.
*
* @param bool $enableFlowLogs
*/
public function setEnableFlowLogs($enableFlowLogs)
{
$this->enableFlowLogs = $enableFlowLogs;
}
/**
* @return bool
*/
public function getEnableFlowLogs()
{
return $this->enableFlowLogs;
}
/**
* The external IPv6 address range that is owned by this subnetwork.
*
* @param string $externalIpv6Prefix
*/
public function setExternalIpv6Prefix($externalIpv6Prefix)
{
$this->externalIpv6Prefix = $externalIpv6Prefix;
}
/**
* @return string
*/
public function getExternalIpv6Prefix()
{
return $this->externalIpv6Prefix;
}
/**
* Fingerprint of this resource. A hash of the contents stored in this object.
* This field is used in optimistic locking. This field will be ignored when
* inserting a Subnetwork. An up-to-date fingerprint must be provided in order
* to update the Subnetwork, otherwise the request will fail with error 412
* conditionNotMet.
*
* To see the latest fingerprint, make a get() request to retrieve a
* Subnetwork.
*
* @param string $fingerprint
*/
public function setFingerprint($fingerprint)
{
$this->fingerprint = $fingerprint;
}
/**
* @return string
*/
public function getFingerprint()
{
return $this->fingerprint;
}
/**
* Output only. [Output Only] The gateway address for default routes to reach
* destination addresses outside this subnetwork.
*
* @param string $gatewayAddress
*/
public function setGatewayAddress($gatewayAddress)
{
$this->gatewayAddress = $gatewayAddress;
}
/**
* @return string
*/
public function getGatewayAddress()
{
return $this->gatewayAddress;
}
/**
* Output only. [Output Only] The unique identifier for the resource. This
* identifier is defined by the server.
*
* @param string $id
*/
public function setId($id)
{
$this->id = $id;
}
/**
* @return string
*/
public function getId()
{
return $this->id;
}
/**
* The internal IPv6 address range that is owned by this subnetwork.
*
* @param string $internalIpv6Prefix
*/
public function setInternalIpv6Prefix($internalIpv6Prefix)
{
$this->internalIpv6Prefix = $internalIpv6Prefix;
}
/**
* @return string
*/
public function getInternalIpv6Prefix()
{
return $this->internalIpv6Prefix;
}
/**
* The range of internal addresses that are owned by this subnetwork. Provide
* this property when you create the subnetwork. For example,10.0.0.0/8 or
* 100.64.0.0/10. Ranges must be unique and non-overlapping within a network.
* Only IPv4 is supported. This field is set at resource creation time. The
* range can be any range listed in theValid ranges list. The range can be
* expanded after creation usingexpandIpCidrRange.
*
* @param string $ipCidrRange
*/
public function setIpCidrRange($ipCidrRange)
{
$this->ipCidrRange = $ipCidrRange;
}
/**
* @return string
*/
public function getIpCidrRange()
{
return $this->ipCidrRange;
}
/**
* Reference to the source of IP, like a PublicDelegatedPrefix (PDP) for
* BYOIP. The PDP must be a sub-PDP in EXTERNAL_IPV6_SUBNETWORK_CREATION or
* INTERNAL_IPV6_SUBNETWORK_CREATION mode.
*
* Use one of the following formats to specify a sub-PDP when creating a dual
* stack or IPv6-only subnetwork with external access using BYOIP: -
* Full resource URL, as inhttps://www.googleapis.com/compute/v1/projects/proj
* ectId/regions/region/publicDelegatedPrefixes/sub-pdp-name - Partial
* URL, as in -
* projects/projectId/regions/region/publicDelegatedPrefixes/sub-pdp-name
* - regions/region/publicDelegatedPrefixes/sub-pdp-name
*
* @param string $ipCollection
*/
public function setIpCollection($ipCollection)
{
$this->ipCollection = $ipCollection;
}
/**
* @return string
*/
public function getIpCollection()
{
return $this->ipCollection;
}
/**
* The access type of IPv6 address this subnet holds. It's immutable and can
* only be specified during creation or the first time the subnet is updated
* into IPV4_IPV6 dual stack.
*
* Accepted values: EXTERNAL, INTERNAL
*
* @param self::IPV6_ACCESS_TYPE_* $ipv6AccessType
*/
public function setIpv6AccessType($ipv6AccessType)
{
$this->ipv6AccessType = $ipv6AccessType;
}
/**
* @return self::IPV6_ACCESS_TYPE_*
*/
public function getIpv6AccessType()
{
return $this->ipv6AccessType;
}
/**
* Output only. [Output Only] This field is for internal use.
*
* @param string $ipv6CidrRange
*/
public function setIpv6CidrRange($ipv6CidrRange)
{
$this->ipv6CidrRange = $ipv6CidrRange;
}
/**
* @return string
*/
public function getIpv6CidrRange()
{
return $this->ipv6CidrRange;
}
/**
* Output only. [Output Only] Possible endpoints of this subnetwork. It can be
* one of the following: - VM_ONLY: The subnetwork can be used for
* creating instances and IPv6 addresses with VM endpoint type. Such a
* subnetwork gets external IPv6 ranges from a public delegated prefix and
* cannot be used to create NetLb. - VM_AND_FR: The subnetwork can be used
* for creating both VM instances and Forwarding Rules. It can also be used
* to reserve IPv6 addresses with both VM and FR endpoint types. Such a
* subnetwork gets its IPv6 range from Google IP Pool directly.
*
* Accepted values: VM_AND_FR, VM_ONLY
*
* @param self::IPV6_GCE_ENDPOINT_* $ipv6GceEndpoint
*/
public function setIpv6GceEndpoint($ipv6GceEndpoint)
{
$this->ipv6GceEndpoint = $ipv6GceEndpoint;
}
/**
* @return self::IPV6_GCE_ENDPOINT_*
*/
public function getIpv6GceEndpoint()
{
return $this->ipv6GceEndpoint;
}
/**
* Output only. [Output Only] Type of the resource. Always compute#subnetwork
* for Subnetwork resources.
*
* @param string $kind
*/
public function setKind($kind)
{
$this->kind = $kind;
}
/**
* @return string
*/
public function getKind()
{
return $this->kind;
}
/**
* This field denotes the VPC flow logging options for this subnetwork. If
* logging is enabled, logs are exported to Cloud Logging.
*
* @param SubnetworkLogConfig $logConfig
*/
public function setLogConfig(SubnetworkLogConfig $logConfig)
{
$this->logConfig = $logConfig;
}
/**
* @return SubnetworkLogConfig
*/
public function getLogConfig()
{
return $this->logConfig;
}
/**
* The name of the resource, provided by the client when initially creating
* the resource. The name must be 1-63 characters long, and comply
* withRFC1035. Specifically, the name must be 1-63 characters long and match
* the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first
* character must be a lowercase letter, and all following characters must be
* a dash, lowercase letter, or digit, except the last character, which cannot
* be a dash.
*
* @param string $name
*/
public function setName($name)
{
$this->name = $name;
}
/**
* @return string
*/
public function getName()
{
return $this->name;
}
/**
* The URL of the network to which this subnetwork belongs, provided by the
* client when initially creating the subnetwork. This field can be set only
* at resource creation time.
*
* @param string $network
*/
public function setNetwork($network)
{
$this->network = $network;
}
/**
* @return string
*/
public function getNetwork()
{
return $this->network;
}
/**
* Input only. [Input Only] Additional params passed with the request, but not
* persisted as part of resource payload.
*
* @param SubnetworkParams $params
*/
public function setParams(SubnetworkParams $params)
{
$this->params = $params;
}
/**
* @return SubnetworkParams
*/
public function getParams()
{
return $this->params;
}
/**
* Whether the VMs in this subnet can access Google services without assigned
* external IP addresses. This field can be both set at resource creation time
* and updated using setPrivateIpGoogleAccess.
*
* @param bool $privateIpGoogleAccess
*/
public function setPrivateIpGoogleAccess($privateIpGoogleAccess)
{
$this->privateIpGoogleAccess = $privateIpGoogleAccess;
}
/**
* @return bool
*/
public function getPrivateIpGoogleAccess()
{
return $this->privateIpGoogleAccess;
}
/**
* This field is for internal use.
*
* This field can be both set at resource creation time and updated
* usingpatch.
*
* Accepted values: DISABLE_GOOGLE_ACCESS,
* ENABLE_BIDIRECTIONAL_ACCESS_TO_GOOGLE, ENABLE_OUTBOUND_VM_ACCESS_TO_GOOGLE
*
* @param self::PRIVATE_IPV6_GOOGLE_ACCESS_* $privateIpv6GoogleAccess
*/
public function setPrivateIpv6GoogleAccess($privateIpv6GoogleAccess)
{
$this->privateIpv6GoogleAccess = $privateIpv6GoogleAccess;
}
/**
* @return self::PRIVATE_IPV6_GOOGLE_ACCESS_*
*/
public function getPrivateIpv6GoogleAccess()
{
return $this->privateIpv6GoogleAccess;
}
/**
* @param self::PURPOSE_* $purpose
*/
public function setPurpose($purpose)
{
$this->purpose = $purpose;
}
/**
* @return self::PURPOSE_*
*/
public function getPurpose()
{
return $this->purpose;
}
/**
* URL of the region where the Subnetwork resides. This field can be set only
* at resource creation time.
*
* @param string $region
*/
public function setRegion($region)
{
$this->region = $region;
}
/**
* @return string
*/
public function getRegion()
{
return $this->region;
}
/**
* The URL of the reserved internal range.
*
* @param string $reservedInternalRange
*/
public function setReservedInternalRange($reservedInternalRange)
{
$this->reservedInternalRange = $reservedInternalRange;
}
/**
* @return string
*/
public function getReservedInternalRange()
{
return $this->reservedInternalRange;
}
/**
* Configures subnet mask resolution for this subnetwork.
*
* Accepted values: ARP_ALL_RANGES, ARP_PRIMARY_RANGE
*
* @param self::RESOLVE_SUBNET_MASK_* $resolveSubnetMask
*/
public function setResolveSubnetMask($resolveSubnetMask)
{
$this->resolveSubnetMask = $resolveSubnetMask;
}
/**
* @return self::RESOLVE_SUBNET_MASK_*
*/
public function getResolveSubnetMask()
{
return $this->resolveSubnetMask;
}
/**
* The role of subnetwork. Currently, this field is only used when purpose is
* set to GLOBAL_MANAGED_PROXY orREGIONAL_MANAGED_PROXY. The value can be set
* toACTIVE or BACKUP. An ACTIVE subnetwork is one that is currently being
* used for Envoy-based load balancers in a region. A BACKUP subnetwork is one
* that is ready to be promoted to ACTIVE or is currently draining. This field
* can be updated with a patch request.
*
* Accepted values: ACTIVE, BACKUP
*
* @param self::ROLE_* $role
*/
public function setRole($role)
{
$this->role = $role;
}
/**
* @return self::ROLE_*
*/
public function getRole()
{
return $this->role;
}
/**
* An array of configurations for secondary IP ranges for VM instances
* contained in this subnetwork. The primary IP of such VM must belong to the
* primary ipCidrRange of the subnetwork. The alias IPs may belong to either
* primary or secondary ranges. This field can be updated with apatch request.
* Supports both IPv4 and IPv6 ranges.
*
* @param SubnetworkSecondaryRange[] $secondaryIpRanges
*/
public function setSecondaryIpRanges($secondaryIpRanges)
{
$this->secondaryIpRanges = $secondaryIpRanges;
}
/**
* @return SubnetworkSecondaryRange[]
*/
public function getSecondaryIpRanges()
{
return $this->secondaryIpRanges;
}
/**
* [Output Only] Server-defined URL for the resource.
*
* @param string $selfLink
*/
public function setSelfLink($selfLink)
{
$this->selfLink = $selfLink;
}
/**
* @return string
*/
public function getSelfLink()
{
return $this->selfLink;
}
/**
* The stack type for the subnet. If set to IPV4_ONLY, new VMs in the subnet
* are assigned IPv4 addresses only. If set toIPV4_IPV6, new VMs in the subnet
* can be assigned both IPv4 and IPv6 addresses. If not specified, IPV4_ONLY
* is used.
*
* This field can be both set at resource creation time and updated
* usingpatch.
*
* Accepted values: IPV4_IPV6, IPV4_ONLY, IPV6_ONLY
*
* @param self::STACK_TYPE_* $stackType
*/
public function setStackType($stackType)
{
$this->stackType = $stackType;
}
/**
* @return self::STACK_TYPE_*
*/
public function getStackType()
{
return $this->stackType;
}
/**
* Output only. [Output Only] The state of the subnetwork, which can be one of
* the following values:READY: Subnetwork is created and ready to useDRAINING:
* only applicable to subnetworks that have the purpose set to
* INTERNAL_HTTPS_LOAD_BALANCER and indicates that connections to the load
* balancer are being drained. A subnetwork that is draining cannot be used or
* modified until it reaches a status ofREADY
*
* Accepted values: DRAINING, READY
*
* @param self::STATE_* $state
*/
public function setState($state)
{
$this->state = $state;
}
/**
* @return self::STATE_*
*/
public function getState()
{
return $this->state;
}
/**
* Output only. [Output Only] The array of external IPv6 network ranges
* reserved from the subnetwork's external IPv6 range for system use.
*
* @param string[] $systemReservedExternalIpv6Ranges
*/
public function setSystemReservedExternalIpv6Ranges($systemReservedExternalIpv6Ranges)
{
$this->systemReservedExternalIpv6Ranges = $systemReservedExternalIpv6Ranges;
}
/**
* @return string[]
*/
public function getSystemReservedExternalIpv6Ranges()
{
return $this->systemReservedExternalIpv6Ranges;
}
/**
* Output only. [Output Only] The array of internal IPv6 network ranges
* reserved from the subnetwork's internal IPv6 range for system use.
*
* @param string[] $systemReservedInternalIpv6Ranges
*/
public function setSystemReservedInternalIpv6Ranges($systemReservedInternalIpv6Ranges)
{
$this->systemReservedInternalIpv6Ranges = $systemReservedInternalIpv6Ranges;
}
/**
* @return string[]
*/
public function getSystemReservedInternalIpv6Ranges()
{
return $this->systemReservedInternalIpv6Ranges;
}
/**
* Output only. [Output Only] The current IP utilization of all subnetwork
* ranges. Contains the total number of allocated and free IPs in each range.
*
* @param SubnetworkUtilizationDetails $utilizationDetails
*/
public function setUtilizationDetails(SubnetworkUtilizationDetails $utilizationDetails)
{
$this->utilizationDetails = $utilizationDetails;
}
/**
* @return SubnetworkUtilizationDetails
*/
public function getUtilizationDetails()
{
return $this->utilizationDetails;
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(Subnetwork::class, 'Google_Service_Compute_Subnetwork');
← Back